CARB Compliant Los Angeles & Riverside County, CA

Your Truck Stays Compliant, You Stay Working

Digital emissions testing for 2013 or newer heavy-duty trucks over 14,000 lbs GVWR. We download data from your truck’s ECU, submit results to CARB, and keep you on the road without the registration headaches.
Large orange semi-truck driving on a rural road with a yellow trailer in Los Angeles & Riverside County, CA

CARB Credentialed Testers Only

Every test is performed by our state-certified credentialed testers using CARB-approved equipment. Your results count because they’re submitted by professionals who meet California’s strict requirements.

Direct CARB Database Submission

We handle the entire CTC-VIS portal process and electronically submit your test results straight to CARB and the DMV. You’re done once we finish the test.

Specialized in 2013+ Trucks

The scan typically takes under five minutes. We plug into your truck’s computer, download the emissions data, and get you back to work with minimal downtime.

CARB Emissions Testing in Los Angeles & Riverside County, CA

What CARB Compliant Testing Actually Means for You

If you’re running a 2013 or newer diesel truck over 14,000 pounds in California, you’re required to pass Clean Truck Check emissions testing. This isn’t the old smoke opacity test. It’s digital. We connect to your truck’s onboard diagnostic system, pull the emissions control data directly from the ECU, and submit it to the state. California mandates this twice a year right now, and that frequency increases to quarterly by 2027. Miss a deadline and the DMV puts a registration hold on your truck. That means no tags, no renewal, and no legal operation until you’re compliant. We make sure that doesn’t happen.

Carb Compliant

Need a quick estimate?

Stay compliant and keep your trucks on the road with All Smog Motors. We specialize in CARB emissions compliance checks for heavy-duty trucks, making the process simple, fast, and stress-free. Whether you’re up against a registration deadline or received a notice to test, our certified team will handle your inspection accurately and efficiently so you can avoid penalties and costly downtime. Fill out the form below to schedule your compliance check today and keep your fleet moving without interruption.

Get a free quote

Heavy-Duty Vehicle Compliance Los Angeles CA

What You Actually Get from Staying Compliant

This isn't about checking a box. It's about keeping your truck working, avoiding fines, and staying ahead of state enforcement that's only getting stricter.

You avoid DMV registration holds that keep your truck parked and costing you money every single day it sits.
Your test results go straight to CARB and the DMV electronically, so there’s no paperwork you need to track or submit yourself.
You stay ahead of roadside monitoring devices that flag high emitters and trigger 30-day compliance notices you don’t have time for.
You meet the semi-annual testing deadlines without scrambling at the last minute or risking penalties that add up fast.
Your truck keeps earning revenue instead of sitting in a shop or waiting for compliance issues to clear.
You get peace of mind knowing a CARB-credentialed tester handled it right the first time with certified equipment.

California CARB Diesel Compliance Testing

This Service Only Works for Specific Trucks

If you’re running a 2013 or newer diesel truck over 14,000 pounds in California, you’re required to pass Clean Truck Check emissions testing. This isn’t the old smoke opacity test. It’s digital. We connect to your truck’s onboard diagnostic system, pull the emissions control data directly from the ECU, and submit it to the state. California mandates this twice a year right now, and that frequency increases to quarterly by 2027. Miss a deadline and the DMV puts a registration hold on your truck. That means no tags, no renewal, and no legal operation until you’re compliant. We make sure that doesn’t happen.

CARB Clean Truck Check Los Angeles & Riverside County, CA

How the Digital Emissions Test Works

This is a straightforward process. SMOG Motors brings CARB-certified OBD testing equipment to your truck. We plug into the diagnostic port, usually a 9-pin J1939 or 16-pin J1962 connector depending on your truck’s make. The device scans your engine’s onboard diagnostic system and pulls emissions control performance data directly from the ECU. It checks whether your diesel particulate filter, NOx sensors, and other emissions components are functioning properly. The scan takes less than five minutes in most cases. Once the data is captured, it’s transmitted directly to CARB’s database through the CTC-VIS portal. You’ll receive confirmation that your test results were submitted, and CARB updates your compliance status. If your truck passes, you’re good until your next deadline. If there’s an issue flagged, we’ll let you know what needs attention before you can retest. The whole point is to confirm your emissions control systems are working as designed, and to do it without taking your truck out of service for hours.

Frequently Asked Questions

Your truck qualifies if it’s model year 2013 or newer and has a gross vehicle weight rating over 14,000 pounds. This applies to diesel and alternative fuel commercial trucks operating in California, whether you’re registered in-state or out-of-state. Older trucks require different testing methods. The service we provide is specifically for 2013 and newer trucks with OBD systems—not older models or lighter vehicles. Check the emissions control label on your engine if you’re unsure, or reach out with your VIN.

Most inspections take 10 to 15 minutes per truck. The process involves downloading data from your truck’s ECU and submitting it to the State of California. Because it’s a digital scan rather than a physical smoke test, it’s fast. For multiple trucks, we can handle 15 to 40 per day depending on your fleet size and location. The goal is keeping your trucks working, not sitting idle.

Yes. Mobile service is what we do. We travel across Los Angeles County and Riverside County to perform inspections at truck stops, yards, job sites, or wherever your trucks are parked. You don’t need to take trucks out of operation or drive to a facility. We bring certified equipment to you, complete the inspection on-site, and submit results directly to CARB. It works around your schedule and operation.

Right now, most commercial trucks need testing twice per year. Your specific deadlines depend on your registration date if you’re California-registered, or the last digit of your VIN if you’re out-of-state or exempt from DMV registration. Starting in October 2027, trucks with OBD systems will need testing four times per year. You can submit passing results up to 90 days before your deadline, so planning ahead helps avoid last-minute stress.

If your truck doesn’t pass, you’ll need emissions system repairs and then a retest before your compliance deadline. The test results show what triggered the failure, usually fault codes or OBD readiness issues. We focus strictly on inspections, not repairs, but the data we provide helps your mechanic know exactly what needs attention. Once repairs are done, we can retest to get you compliant.

Yes. We’re a Certified Credential Tester, which is the legal requirement to perform Clean Truck Check emissions inspections in California. That means we’ve completed CARB’s official training, passed the exam, and are authorized to download ECU data and submit results to the state. Not all emissions testers are certified for this program, so working with a credentialed tester ensures your results are valid and accepted by CARB and the DMV.

If your registration is blocked due to Clean Truck Check non-compliance, a passing inspection should clear it. Once we submit your passing test results to CARB, it typically takes about three business days for the DMV to process and update your vehicle’s compliance status. If you’re facing a registration hold, reach out so we can get you tested and back on the road quickly.

Yes. Any commercial truck over 14,000 pounds that operates on California roads must comply, regardless of where it’s registered. If you’re an out-of-state operator hauling into California, you’re required to register in the CTC-VIS system, pay the annual compliance fee, and pass emissions testing on the same schedule as California trucks. Compliance deadlines for out-of-state trucks are based on the last digit of your VIN.

Regular smog checks are for passenger vehicles. Clean Truck Check is California’s heavy-duty emissions program for commercial trucks over 14,000 pounds. For trucks with 2013 or newer engines, it involves scanning the onboard diagnostics system using CARB-certified equipment and submitting that data to the state. It’s faster than traditional smoke tests and focuses on ensuring your emissions control systems work properly throughout the truck’s life.

Cities we provide Carb Compliant In